In other words, Form Concrete Steps with Sidewalls can save you money and time. How to form concrete steps without using concrete slabs is a question that has puzzled the minds of construction experts for many years. It is a common misconception that the only way to install stairs is by the use of large rectangular slabs. This leads to the problem of too much debris that forms at the base and also makes it difficult to walk on.
The answer is simple, using stairs made from concrete will not only save you money but will also be a lot easier and more convenient than traditional stairs made from wooden form. In fact, most homeowners prefer to have these steps installed rather than the traditional ones because they are easier to maintain and even to install. Now, how to form concrete steps with sidewalls? Here are some tips that may help. You do not have to worry if you are not familiar with this project since the steps are pretty easy to complete.
First, make sure you have enough ladders or steps. Measure the total length and width of the staircase before buying anything. Get at least four pieces of measure so you will be ready for concrete leveling. Ladders should be one inch deep and at least four feet long, but the measurement of your staircase may vary depending on the length of the steps.
Form Concrete Steps with Sidewalls will need to be anchored to the stairs so that when the concrete steps are poured, the stringers will be under heavy tension and hold tightly onto the risers. To ensure a perfect fit, anchor all the stringers at once, but allow some space between them for the stringers to overlap slightly. The next thing you have to do is to lay the concrete steps with skid rollers directly over the risers. Make sure they are centered over the end of the stairs.
Now, measure the depth of the skid rollers and choose the four inch boards that will fit. Use a level to ensure that the stringers are even and perpendicular to each other. Cut the two pieces of wood, one at a time, about one inch longer than the actual required length. Drill holes in the wooden form and screw the wooden skid rollers into place. Now it’s time to fill the concrete steps with concrete mix. Fill all the skids evenly.
To finish your stairs, you can add either a decorative step mat or decorative concrete tiles. Since you used a good, solid table saw to cut the wooden boards, they will serve you well. Cut the mats according to the pattern you have chosen and use them to put it on the bottom two inches. Then take a piece of tape to measure the overall length. Remember this measurement so you can buy enough matting to complete the project.
Form Concrete Steps with Sidewalls are a great addition to a new home or a remodeled home. The finished stairs will be durable and look great with the addition of a new countertop, stone color and stain to match the existing wood. Before adding the concrete steps, make sure the riser is level, and that the treads are in the proper position for your style of floor. Remember that you can always install the steps later to save some time and money.
Form Concrete Steps with Sidewalls are a simple way to add a level surface to a staircase. You won’t have to worry about leveling by hand using a tape measure, and you can save some time installing the riser. You will save some money over having to hire someone to do it for you. In the long run, the cost of Form Concrete Steps with Sidewalls will pay for itself.