Home>>Home Improvement>>How To Repair Concrete Rainwater Tank
Concrete Rainwater Tank
Home Improvement

How To Repair Concrete Rainwater Tank

If you want to repair concrete rainwater tanks of yours, it may be a big headache for you. But you are not required to replace the whole concrete tank; in fact, you could be routine to it. You may not realize that there are certain ways by which you could make your tan last longer. Here are some tips that could help you out.

Cleaning Your Water Tank: Every house or office that has a water tank has a concrete water tank and the same is true with the concrete tanks for rainwater. But there are certain things that you have to remember. For one, you need to ensure that you regularly clean the tank so that dirt does not accumulate inside the tank and cause clogging. The dirt in the tank could also block the flow of water thus causing the tank to become stagnant.

In order to keep dirt from accumulating inside the tank, you could use a non-skid waterproof membrane coating. This coating is made using a rubber compound that could prevent water from seeping into the tank surface and entering inside the system. To apply the coating, you must first clean the surface of the water tank using a pressure washer and a water-jetting machine. After cleaning the tank, apply a thin layer of the non-skid waterproof membrane coating and then let it dry.

Washing Machine: In case you have a washing machine at home, the maintenance for it is very simple. All you have to do is to add water to the washbasin and set the machine on spin. When it is spinning, the suction would push the dirt and grime from the inside of the washer. You can use a wire mesh to cover the top and sides of the washer basin so that it prevents the dirt to enter inside the machine. When the repair is done, all you need to do is to wipe it with a paper towel and then reuse the washer.

Debris Filter: Another simple method to repair concrete walls and dams is to install a debris filter. This filter will capture all kinds of solid and liquid debris before they enter the water system. This will ensure that the system remains clean at all times. You can install this device with your washing machine or with a well pump as well.

Cement Grinder: In case you have a large number of concrete structures, repairing them will be very easy. One good option is to use cement grinders. These grinder have a rotating blade and can easily grind away all kinds of debris. If you are using cedargrove concrete flooring, then you should know that it is very important to protect the surface from being ruined. The best way to do this is to install a saw cut-in barrier beneath the floor surface so that nothing can damage the surface.

Cement Grinder And Concrete Slab Repair: After installing the debris filter and the cutting blade, you should next use a cement slag and cement saw to grind away the remaining pieces of concrete. With the cement slag, you should also apply some pressure and then drag the saw across the concrete slab. Once the slab is granted, you should rinse it with water and then allow it to dry completely.

Rust Repair: Another rust repair option is to use an acid rust repair product. You can find this product at any home improvement store or you may also purchase it online. The acid will eat away at the iron in your concrete slab and then the rust stain will be left behind. Then, you should place some teak oil over the rust stain and then apply it liberally over the rust repair area. This will help to prevent future stains from appearing on your concrete floors.